|
| 18 North 57th Drive
Phoenix, AZ 85043
|
 |
|
For over 50 years OMCO has been one of the largest producers of Roll-Formed
steel shapes across the world. Diverse industries across the globe depend on
OMCO for prompt fulfillment of their production needs. OMCO is a staple of
consistent high quality parts and service in the Midwest, and is excited to
announce that same high level and superior quality is being produced in our new
Arizona Manufacturing Facility. This expansion allows OMCO to be more localized
to our West Coast clientele and provide a major advantage in keeping low pricing
in all markets. |
 |
|
One focus of our new facility is the standard line of
roll-formed shapes used in the trailer and truck-body industries.
Below is a sampling of our standard off-the-shelf products:
|
- 12 Gauge Horizontal E Track
- 12 Gauge Vertical E Track
- 16 and 18 Gauge 1 3/8” Z Post, Pierced
- 16 Gauge 13/16” Z Post, Pierced
- 16 Gauge Hat Post, Pierced
- 14 Gauge Double E Post
- 10 Gauge 18” OMCO Extreme Duty Scuff ©
|
- 14 Gauge Logistic A Post
- 14 Gauge Horizontal F Track
- 16 and 18 Gauge 1” Anti-Snag Roof Bow
- 16 Gauge Walk Ramp Channel
- 12 Gauge Stake Body Post
- 16 Gauge Slat Liner Hemmed
- 18 Gauge Scuff Plate
|
In addition to the products listed above, our new fully integrated Manufacturing Facility in Phoenix can cater to custom parts that are tooled especially for you, to provide you with that extra advantage over your competitors. You will work closely with our representatives and in-house engineers to make certain that everything is done to your strict standards and satisfaction.
OMCO also supplies secondary and finishing operations including piercing, slotting, forming, and notching; allowing us to fulfill your needs with a completed high-quality part. Each facility can roll metal and aluminum up to .375” thickness, widths to 32”, and any length requested.
|
|
|
For more information, please contact:
|
| |
Matthew Bush
Regional Sales Manager
18 North 57th Dr
Phoenix, AZ 85043
Direct: 602-233-9788
Office: 602-621-0948
Fax: 602-233-9792
mbush@omcoform.com
|
| |
Directions:
|
| |
From I-10, exit at 138/59th Ave.
Continue South onto N. 59th Ave.
Turn left onto W. Washington St.
Arive at the corner of N. 57th Dr.
We look forward to your visit.
|
|
| |
|
